Issue
I followed some tutorials that explained how to write Linux kernel modules and I am a bit confused. Even after reading the href="https://www.kernel.org/pub/linux/kernel/people/mochel/doc/text/class.txt" rel="nofollow noreferrer">official "documentation", I have poor understanding of the concepts.
After creating a character device (register_chrdev), I see it is common to use a combination of the following functions:
class_create
class_device_create
device_create
I was not able to understand, what is a class, device and, class device and driver?
Which one of these actually responsible to create an entry under /proc/?
Solution
Rather than going into what's a class, or what's a device (I'm no expert in Linux kernel), I will address the question as follows.
After creating the character device, you want to be able to access it from the user space. To do this, you need to add a device node under /dev. You can do this in two ways.
Use mknod to manually add a device node (old)
mknod /dev/<name> c <major> <minor>
OR
Use udev
This is where the class_create and device_create or class_device_create (old) come in.
To notify udev from your kernel module, you first create a virtual device class using
struct class * class_create(owner, name)
Now, the name will appear in /sys/class/<name>.
Then, create a device and register it with sysfs.
struct device *device_create(struct class *class, struct device *parent,
dev_t devt, void *drvdata, const char *fmt, ...)
Now, device name will appear in /sys/devices/virtual/<class name>/<device name> and /dev/<device name>
It's not clear what you are asking about the /proc entry.
After your module is loaded, it will appear in /proc/modules (do a cat /proc/modules to see it). And, after you allocate the device numbers, say with
int register_chrdev_region(dev_t first, unsigned int count, char *name)
, the name will appear in /proc/devices (do a cat /proc/devices to see it).
And, please check the kernel sources for these functions as well, as they provide a good description of what they do in their comments.
The good old LDD3 does not provide these mechanisms, but it's a very good source.
Answered By - dhanushka Answer Checked By - Marilyn (WPSolving Volunteer)