Issue

I have searched many of the similar issues but can't seem to figure out the one I'm having. I have a Vagrantfile with which I setup 3 VMs. I add a public key to each VM so I can run Ansible against the boxes after vagrant up command (I don't want to use the ansible provisioner). I forward all the SSH ports on each box.

I can vagrant ssh <server_name> on to each box successfully.

With the following:

ssh [email protected] -p 2711 -i ~/.ssh/ansible <-- successful connection
ssh [email protected] -p 2712 -i ~/.ssh/ansible <-- connection error
ssh: connect to host 192.168.56.3 port 2712: Connection refused
ssh [email protected] -p 2713 -i ~/.ssh/ansible <-- connection error
ssh: connect to host 192.168.56.4 port 2713: Connection refused

And

ssh vagrant@localhost -p 2711 -i ~/.ssh/ansible <-- successful connection
ssh vagrant@localhost -p 2712 -i ~/.ssh/ansible <-- successful connection
ssh vagrant@localhost -p 2713 -i ~/.ssh/ansible <-- successful connection

Ansible can connect to the first one ([email protected]) but not the other 2 also. I can't seem to find out why it connects to one and not the others. Any ideas what I could be doing wrong?

The Ansible inventory:

{
  "all": {
      "hosts": {
          "kubemaster": {
              "ansible_host": "192.168.56.2",
              "ansible_user": "vagrant",
              "ansible_ssh_port": 2711
          },
          "kubenode01": {
              "ansible_host": "192.168.56.3",
              "ansible_user": "vagrant",
              "ansible_ssh_port": 2712
          },
          "kubenode02": {
              "ansible_host": "192.168.56.4",
              "ansible_user": "vagrant",
              "ansible_ssh_port": 2713
          }
      },
      "children": {},
      "vars": {}
  }
}

The Vagrantfile:

# Define the number of master and worker nodes
NUM_MASTER_NODE = 1
NUM_WORKER_NODE = 2

PRIV_IP_NW = "192.168.56."
MASTER_IP_START = 1
NODE_IP_START = 2

# Vagrant configuration
Vagrant.configure("2") do |config|
  # The most common configuration options are documented and commented below.
  # For a complete reference, please see the online documentation at
  # https://docs.vagrantup.com.

  # default box
  config.vm.box = "ubuntu/jammy64"

  # automatic box update checking.
  config.vm.box_check_update = false

  # Provision master nodes
  (1..NUM_MASTER_NODE).each do |i|
    config.vm.define "kubemaster" do |node|
      # Name shown in the GUI
      node.vm.provider "virtualbox" do |vb|
          vb.name = "kubemaster"
          vb.memory = 2048
          vb.cpus = 2
      end
      node.vm.hostname = "kubemaster"
      node.vm.network :private_network, ip: PRIV_IP_NW + "#{MASTER_IP_START + i}"
      node.vm.network :forwarded_port, guest: 22, host: "#{2710 + i}"
      
      # argo and traefik access
      node.vm.network "forwarded_port", guest: 8080, host: "#{8080}"
      node.vm.network "forwarded_port", guest: 9000, host: "#{9000}"

      # synced folder for kubernetes setup yaml
      node.vm.synced_folder "sync_folder", "/vagrant_data", create: true, owner: "root", group: "root"
      node.vm.synced_folder ".", "/vagrant", disabled: true

      # setup the hosts, dns and ansible keys
      node.vm.provision "setup-hosts", :type => "shell", :path => "vagrant/setup-hosts.sh" do |s|
        s.args = ["enp0s8"]
      end
      node.vm.provision "setup-dns", type: "shell", :path => "vagrant/update-dns.sh"
      node.vm.provision "shell" do |s|
        ssh_pub_key = File.readlines("#{Dir.home}/.ssh/ansible.pub").first.strip
        s.inline = <<-SHELL
          echo #{ssh_pub_key} >> /home/vagrant/.ssh/authorized_keys
          echo #{ssh_pub_key} >> /root/.ssh/authorized_keys
        SHELL
      end
    end
  end

  # Provision Worker Nodes
  (1..NUM_WORKER_NODE).each do |i|
    config.vm.define "kubenode0#{i}" do |node|
      node.vm.provider "virtualbox" do |vb|
          vb.name = "kubenode0#{i}"
          vb.memory = 2048
          vb.cpus = 2
      end
      node.vm.hostname = "kubenode0#{i}"
      node.vm.network :private_network, ip: PRIV_IP_NW + "#{NODE_IP_START + i}"
      node.vm.network :forwarded_port, guest: 22, host: "#{2711 + i}"

      # synced folder for kubernetes setup yaml
      node.vm.synced_folder ".", "/vagrant", disabled: true

      # setup the hosts, dns and ansible keys
      node.vm.provision "setup-hosts", :type => "shell", :path => "vagrant/setup-hosts.sh" do |s|
        s.args = ["enp0s8"]
      end
      node.vm.provision "setup-dns", type: "shell", :path => "vagrant/update-dns.sh"
      node.vm.provision "shell" do |s|
        ssh_pub_key = File.readlines("#{Dir.home}/.ssh/ansible.pub").first.strip
        s.inline = <<-SHELL
          echo #{ssh_pub_key} >> /home/vagrant/.ssh/authorized_keys
          echo #{ssh_pub_key} >> /root/.ssh/authorized_keys
        SHELL
      end
    end
  end
end

Solution

Your Vagrantfile confirms what I suspected:

You define port forwarding as follows:
```
node.vm.network :forwarded_port, guest: 22, host: "#{2710 + i}"
```
That means, port 22 of the guest is made reachable on the host under port 2710+i. For your 3 VMs, from the host's point of view, this means:
- 192.168.2.1:22 -> localhost:2711
- 192.168.2.2:22 -> localhost:2712
- 192.168.2.3:22 -> localhost:2713
As IP addresses for your VMs you have defined the range 192.168.2.0/24, but you try to access the range 192.168.56.0/24.
If a Private IP address is defined (for your 1st node e.g. 192.168.2.2), Vagrant implements this in the VM on VirtualBox as follows:
Two network adapters are defined for the VM:
1. NAT: this gives the VM Internet access
2. Host-Only: this gives the host access to the VM via IP 192.168.2.2.
For each /24 network, VirtualBox (and Vagrant) creates a separate VirtualBox Host-Only Ethernet Adapter, and the host is .1 on each of these networks.

What this means for you is that if you use an IP address from the 192.168.2.0/24 network, an adapter is created on your host that always gets the IP address 192.168.2.1/24, so you have the addresses 192.168.2.2 - 192.168.2.254 available for your VMs.

This means: You have for your master a collision of the IP address with your host!
But why does the access to your first VM work?
```
ssh [email protected] -p 2711 -i ~/.ssh/ansible <-- successful connection
```
That is relatively simple: The network 192.168.56.0/24 is the default network for Host-Only under VirtualBox, so you probably have a VirtualBox Host-Only Ethernet Adapter with the address 192.168.56.1/24.

Because you have defined a port forwarding in your Vagrantfile a mapping of the 1st VM to localhost:2711 takes place. If you now access 192.168.56.1:2711, this is your own host, thus localhost, and the SSH of the 1st VM is mapped to port 2711 on this host.

So what do you have to do now?

Change the IP addresses of your VMs, e.g. use 192.168.2.11 - 192.168.2.13.
The access to the VMs is possible as follows:

Node via Guest-IP via localhost

kubemaster 192.168.2.11:22 localhost:2711

kubenode01 192.168.2.12:22 localhost:2712

kubenode02 192.168.2.13:22 localhost:2713

Note: If you want to access with the guest IP address, use port 22, if you want to access via localhost, use port 2710+i defined by you.

Node	via Guest-IP	via localhost
`kubemaster`	`192.168.2.11:22`	`localhost:2711`
`kubenode01`	`192.168.2.12:22`	`localhost:2712`
`kubenode02`	`192.168.2.13:22`	`localhost:2713`

Answered By - phanaz

Answer Checked By - David Goodson (WPSolving Volunteer)

Friday, October 28, 2022

[SOLVED] Vagrant multi vm ssh connection setup works on one but not the others

Issue

Solution

So what do you have to do now?